Cold Room Repair London
Specialist cold room repair and maintenance for commercial businesses across London. Our F-Gas certified engineers diagnose and repair all types of walk-in cold room faults — from temperature failures and refrigerant leaks to compressor breakdowns and evaporator faults. Fast response, emergency call-outs available.
Our cold room repair engineers carry a wide range of common refrigeration parts and aim to complete same-day cold room repairs wherever possible. We work on all types of commercial cold rooms — walk-in cold rooms, chiller rooms, produce cold rooms, butcher cold rooms, dairy cold rooms and commercial cold storage facilities — across all London boroughs.
Specialist cold room repair engineers
Expert cold room repair across London
Sun Meter Cooling provides professional cold room repair and maintenance services for commercial businesses across London. Our F-Gas certified engineers specialise in diagnosing and repairing all types of commercial cold room systems — from small prep room chillers to large multi-room cold storage facilities.
We work on walk-in cold rooms, chiller rooms, produce cold rooms, butcher cold rooms, dairy cold rooms, and commercial cold storage facilities across restaurants, hotels, supermarkets, food production sites, and commercial kitchens throughout London.
A cold room breakdown can cause significant stock loss and business disruption. We understand the urgency and aim to respond quickly to all cold room emergency call-outs. Our engineers carry a comprehensive range of cold room parts and refrigeration components to enable fast, effective repairs.
Our cold room repair engineers are F-Gas certified and experienced with all major commercial refrigeration brands and refrigerant types. We carry out full cold room fault diagnostics using specialist refrigeration test equipment — ensuring we identify and repair the root cause of the cold room fault, not just the symptoms. Every cold room repair is completed to the highest standard with a full service report provided on completion.
Cold room faults we repair
Commercial Cold Room Faults Our Engineers Repair
Our cold room repair engineers diagnose and repair the full range of commercial cold room faults — from simple thermostat and controller issues through to complete refrigeration system overhauls. No cold room fault is too complex for our experienced cold room engineers.
Temperature Failures
Cold room not holding temperature, running too warm or too cold. We diagnose and repair thermostat faults, controller issues, refrigerant loss, and compressor problems causing temperature instability.
Compressor Faults
Compressor not starting, tripping out, or running continuously. We carry out compressor diagnostics, electrical testing, and full compressor replacements on all major brands.
Evaporator & Condenser Repairs
Iced-up evaporators, blocked condenser coils, fan motor failures, and coil leaks. We clean, repair, and replace evaporator and condenser units to restore full cooling performance.
Refrigerant Leaks
Loss of refrigerant gas causing poor cooling or complete system failure. Our F-Gas certified engineers locate leaks, carry out repairs, and recharge the system with the correct refrigerant.
Defrost System Faults
Defrost heater failures, defrost timer faults, and defrost control issues causing ice build-up on evaporator coils. We repair and replace all defrost system components.
Door & Panel Repairs
Cold room door seal replacements, door closer repairs, hinge replacements, and insulated panel repairs. Damaged doors and seals cause significant energy loss and temperature instability.
How our cold room engineers work
Our Cold Room Repair Process
Every cold room repair we carry out follows a structured process — from the initial emergency call-out through to system testing and handover. Our cold room repair engineers work methodically to ensure every cold room repair is completed correctly and the system is fully operational before they leave site.
Emergency Call-Out & Initial Assessment
When your cold room breaks down, call our cold room repair engineers immediately on 020 3488 1161. Our team will take details of the fault and dispatch a cold room engineer to your premises as quickly as possible. On arrival, our cold room repair engineer carries out an initial visual assessment — checking temperatures, inspecting the condenser unit, evaporator coil, electrical panel and controller to identify the likely cause of the cold room fault.
Cold Room Fault Diagnosis
Our cold room engineers use specialist refrigeration diagnostic equipment to carry out a thorough fault diagnosis. This includes refrigerant pressure testing, electrical continuity testing, temperature differential measurements, compressor current draw analysis and controller diagnostics. Accurate cold room fault diagnosis is critical — it ensures our engineers repair the root cause of the cold room breakdown rather than just treating the symptoms.
Repair Quotation & Parts
Once the cold room fault has been diagnosed, our cold room repair engineer will explain the issue clearly and provide a repair quotation. Our cold room engineers carry a wide range of common spare parts — compressor contactors, fan motors, defrost heaters, thermostats, solenoid valves, expansion valves and pressure switches — enabling same-day cold room repairs in many cases. For less common parts, we source from our refrigeration parts suppliers as quickly as possible.
Cold Room Repair
With your approval, our cold room repair engineer carries out the repair. All refrigerant work is carried out by our F-Gas certified cold room engineers in compliance with UK F-Gas regulations. We work carefully and methodically to ensure the cold room repair is completed correctly — whether that is replacing a failed compressor, repairing a refrigerant leak, replacing a defrost heater, repairing a door seal or resolving an electrical fault in the cold room control panel.
System Testing & Temperature Verification
After completing the cold room repair, our engineers run the system through a full operational test. We monitor the pull-down temperature to confirm the cold room is reaching and holding the correct operating temperature. We check refrigerant pressures, airflow, defrost operation and all control functions to confirm the cold room is operating correctly before leaving site.
Service Report & Aftercare Advice
Our cold room repair engineers complete a full service report documenting the fault found, the repair carried out, refrigerant quantities used (where applicable) and the system condition at completion. We provide advice on any additional maintenance that would benefit the cold room and offer planned preventative maintenance contracts to help prevent future cold room breakdowns.
F-Gas Certified Cold Room Engineers
All Sun Meter Cooling cold room repair engineers hold current F-Gas certification — a legal requirement for anyone handling refrigerants in the UK. Our cold room engineers are trained and certified to carry out all refrigerant work, including leak detection, pressure testing, refrigerant recovery and recharging, in full compliance with UK F-Gas regulations.
Technical expertise
Experienced Cold Room Repair Engineers
Our cold room repair engineers have extensive experience working on commercial cold rooms, chiller rooms, blast chillers, produce cold rooms, butcher cold rooms, dairy cold rooms and commercial cold storage facilities across restaurants, hotels, food production facilities, bakeries, catering companies and commercial kitchens throughout London.
We specialise in cold room diagnostics, refrigeration fault finding, refrigerant leak detection, compressor replacements, evaporator repairs, condenser unit servicing, refrigerant charging, electrical diagnostics and emergency cold room breakdown support. Our cold room engineers are experienced with all common commercial refrigerants and all major refrigeration component brands.
Our F-Gas certified cold room repair engineers work on systems from all leading brands including Copeland, Danfoss, Bitzer, Tecumseh, Rivacold, Zanotti, Carel, Dixell, Emerson and Embraco. We are experienced with commercial refrigerants including R404A, R134A, R452A, R410A, R290 and R600A and other refrigerants commonly used in commercial cold room systems.
Cold room systems and components we repair
Who we work with
Cold Room Repair for London Businesses
Common questions
Cold Room Repair FAQs
How quickly can your cold room repair engineers attend?
We aim to respond to cold room emergency call-outs as quickly as possible across London. In many cases our cold room repair engineers can attend on the same day. Call us on 020 3488 1161 to discuss your cold room breakdown and we will advise on the earliest available attendance time.
Can your cold room engineers repair all types of commercial cold rooms?
Yes. Our cold room repair engineers work on all types of commercial cold rooms — walk-in cold rooms, chiller rooms, produce cold rooms, butcher cold rooms, dairy cold rooms, blast chillers and commercial cold storage facilities. We work on systems from all major manufacturers and with all common commercial refrigerants.
My cold room is not holding temperature — what could be causing it?
A cold room not holding temperature can be caused by a number of faults — refrigerant loss, compressor failure, evaporator icing, condenser blockage, defrost system fault, door seal failure or a controller fault. Our cold room repair engineers carry out a full diagnostic to identify the exact cause and carry out the correct cold room repair.
Do your cold room engineers carry spare parts?
Yes. Our cold room repair engineers carry a wide range of common refrigeration spare parts on their vans — including compressor contactors, fan motors, defrost heaters, thermostats, solenoid valves, expansion valves and pressure switches. This enables same-day cold room repairs in many cases without waiting for parts to be ordered.
Are your cold room engineers F-Gas certified?
Yes. All Sun Meter Cooling cold room repair engineers hold current F-Gas certification. This is a legal requirement for anyone handling refrigerants in the UK. Our cold room engineers are trained and certified to carry out all refrigerant work — including leak detection, pressure testing, refrigerant recovery and recharging — in full compliance with UK F-Gas regulations.
Do you offer cold room maintenance contracts?
Yes. We offer planned preventative maintenance (PPM) contracts for commercial cold rooms. Regular servicing by our cold room engineers helps prevent breakdowns, extends the working life of your cold room equipment and keeps your cold room running efficiently. Contact us to discuss a maintenance contract for your premises.
Cold room broken down? Call us now
Don't risk losing your stock. Our engineers are available for emergency cold room repair call-outs across London. Call us now or book online for a fast response.
Our cold room repair engineers cover all London boroughs including Central London, North London, South London, East London, West London, City of London, Westminster, Canary Wharf, Shoreditch, Brixton, Croydon, Wimbledon, Hammersmith, Islington, Camden, Hackney, Lewisham, Greenwich and Woolwich.
What to do if your cold room breaks down
If your cold room breaks down, call our cold room repair engineers immediately. While waiting for our engineer to arrive: